[jonzcustomshop]

I am setting up the new cab mounts now, I ended up just C notching all four cab support braces, that dropped the cab down enough that the rockers hang below the frame rails , which is what I wanted.
The hood just clears the aircleaner,so I won't be Zing the frame, the rocker is still 9 inches off the ground, so there are some cut coils in my future...
After a ton of measuring, and cutting an extra 3 inches out of the front fenders, and moving the cab forward, I am almost (1 inch short) to the dimensions and wheelbase of a short fleet.