The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**old Rusty C10** · 06-25-2008, 06:46 PM

you can make a 2wd cab fit a 4wd if you cut the tunnel and swap it out.. if you swap an older cab onto the newer frame,you need to use the cab mounts for the chassis, and youll have to use the nose to match up to the cab there is no frame modification. there have been several threads on cab swaps i did one on a 2wd truck years back an 81 cab onto a 76 frame its pretty easy.. if things go well its a job you can do over a weekend ( as long as ya dont break too often for beers) good luck and why no?t start a thread about your swap with lots of pics

06-25-2008, 06:46 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,352	Re: Cab Swap you can make a 2wd cab fit a 4wd if you cut the tunnel and swap it out.. if you swap an older cab onto the newer frame,you need to use the cab mounts for the chassis, and youll have to use the nose to match up to the cab there is no frame modification. there have been several threads on cab swaps i did one on a 2wd truck years back an 81 cab onto a 76 frame its pretty easy.. if things go well its a job you can do over a weekend ( as long as ya dont break too often for beers) good luck and why no?t start a thread about your swap with lots of pics __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!