The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

FXJETS · 06-30-2008, 11:49 PM

Check the sending wire. Ground the wire and check the needle swing. then open the connection and the needle shoud swing in the oppisite direction. if not the gauge is bad, or the resister is bad.

06-30-2008, 11:49 PM	#6
FXJETS Registered User Join Date: May 2007 Location: Vista, CA Posts: 5	Re: Temp Gauge problem again Check the sending wire. Ground the wire and check the needle swing. then open the connection and the needle shoud swing in the oppisite direction. if not the gauge is bad, or the resister is bad.