The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

YOLO · 07-24-2008, 09:43 AM

GMBowtie is correct. I did the pancake, shortened my stock a-arms 2 inch drop spindles, but I also did a 2 inch Z and SFBD. The frame is all custom but I used the stock front crossmember. That was all to lay on 26's. If you want to go with a smaller wheel, then you will not have to go that drastic. DO IT! Get an extra crossmember or at least know were to get one NOW if you mess up. Measure 10 times, cut once.

07-24-2008, 09:43 AM	#42
YOLO Custom Truck Lover! Join Date: Nov 2007 Location: Phoenix, AZ Posts: 440	Re: z'd frame? GMBowtie is correct. I did the pancake, shortened my stock a-arms 2 inch drop spindles, but I also did a 2 inch Z and SFBD. The frame is all custom but I used the stock front crossmember. That was all to lay on 26's. If you want to go with a smaller wheel, then you will not have to go that drastic. DO IT! Get an extra crossmember or at least know were to get one NOW if you mess up. Measure 10 times, cut once. __________________ Squarebody guy Last edited by YOLO; 07-24-2008 at 09:44 AM.