The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - What's the correct way to remove door panels?

**old Rusty C10** · 07-25-2008, 09:53 PM

they have a special tool to remove the window handle crank.. unscrew the door lock button head ,there are a bunch of phillips head screws that hold the panel to the door.. i wind the window all the way down and i take some dish soap and lube the edge of the rubber by the vent window then i pop pff the two plastic clips that hold the door panel in and i carefully wiggle out the door panel.. its usually easier to pop out the door handle first then work on loosening it from the window

07-25-2008, 09:53 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,345	Re: What's the correct way to remove door panels? they have a special tool to remove the window handle crank.. unscrew the door lock button head ,there are a bunch of phillips head screws that hold the panel to the door.. i wind the window all the way down and i take some dish soap and lube the edge of the rubber by the vent window then i pop pff the two plastic clips that hold the door panel in and i carefully wiggle out the door panel.. its usually easier to pop out the door handle first then work on loosening it from the window __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!