Quote:
Originally Posted by special-K
I`m curious what`s causing this.It`s not in the axle if it`s the same with a few and I`ve never run into such a problem on any truck before.I know there are spindle shims,but I`ve never seen them needed.Basically,there`s no adjustment because there should never be a need for it under normal circumstances.Is there actually a reading showing your castor is off?Is it a consistant reading?It sounds like a problem in steering.If I did anything with the axle I`d shim the spindles.What was the alignment shop`s suggestion?
|
Tim, yes the reading for the caster was off and I know should have asked him what it was. Wasn't thinking that day, anyways I', lost too. The alignment shop said he would leave it alone and just drive it. Well I just can't do that, I like everything to be close to perfct if I can! I'm going to check everything that you all suggested and if all of it checks out ok I'm going to live with it I guess. Thanks for the help guys!!