The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JimKshortstep4x4 · 07-30-2008, 07:56 PM

The relays are normally mounted on the inside heater box with a remote ground so what you have should work.

The hose pictured is to circulate air through the blower motor. From looking at the picture it does not look too bad. Does the blower motor have a hole in it for the flanged end of the hose?

Jim

07-30-2008, 07:56 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Factory A/C & Heater Help The relays are normally mounted on the inside heater box with a remote ground so what you have should work. The hose pictured is to circulate air through the blower motor. From looking at the picture it does not look too bad. Does the blower motor have a hole in it for the flanged end of the hose? Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC