The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

djracer · 08-02-2008, 10:26 AM

if you don't want to do the rearend but once put a good 9 inch for in it! I would get moser 35 spline axles and a spool.

You could make a 10 or 12 bolt work short term but not in the long run. plus when you break the 10 or 12 bolt the wheel can come off and destroy a bed side.

08-02-2008, 10:26 AM	#47
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: suspension/gearing/slicks if you don't want to do the rearend but once put a good 9 inch for in it! I would get moser 35 spline axles and a spool. You could make a 10 or 12 bolt work short term but not in the long run. plus when you break the 10 or 12 bolt the wheel can come off and destroy a bed side. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!