So with out knowing everything about your set up, I took some guesses and this is what I have come up with based on the info you provided. Please feel free to correct anything and I'll be happy to make a few adjustments..
This is based on a 11.02-1 cr using:
62cc heads
-10cc valve relief flat top pistons
Pistons sitting -.01" in the hole
.043 thickness head gaskets
Bore of 4.02
Stroke 4"
1.5 rocker
1 5/8's headers
Do you have any idea what the intake centerline is on that cam? That is going to dictate dynamic compression and should change the curve slightly.