NP 205 won't go into low range all of the way
see the wreck:
http://67-72chevytrucks.com/vboard/s...to_threadtools
Now , for what ever the reason 2 hi and 4 hi are fine but I can only partialy engage low range it goes in enough to think you are in and then it pops out when you put a load on it............the linkage seems fine and nothing in that area was affected when I crashed. For some reason it is like the front axle is engaging (that part of the shifting) but the low range will not go in.
Any ideas?
__________________
69 K-20 cloned to a 67 with front clip and some other stuff.
383 .040 over
Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:
|