|
Re: What a surprise!
There are "pick" type of tools that you would use by drilling a 1/8-inch hole or a series of holes then use the picks to pull the metal. They're called pull rods.
Another method would be to use one of the mig/tig/arc tools that would have you welding a stick to the metal, then using a puller (slap hammer) to pull out the dent.
Or, as LonghornMan said......
__________________
Member Nr. 2770
'96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed.
'69 C-10 SWB; 350/TH400 - in limbo
The older I get, the better I was.
|