The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Temp Gauge ?

jaybud · 08-04-2008, 09:11 PM

This is a newbie + first time trying this + out of daylight question.

I have a temp gauge in the lower, right-most spot on my 69 blazer. I've been able to remove the nut holding on the sending tube. At this point, is it really 3 screws holding the gauge in place, from the rear, as the service manual implies.

I"m quoting 'Oil and/or Air Pressure Gauge Replacement' on page 12-14 on a reprinted manual:

"Remove three (3) rear cover retaining screws. Tip cover and gauge assembly and remove from instrument cluster housing."

08-04-2008, 09:11 PM	#1
jaybud Registered User Join Date: Mar 2007 Location: Central Virginia Posts: 4	Temp Gauge ? - Simple This is a newbie + first time trying this + out of daylight question. I have a temp gauge in the lower, right-most spot on my 69 blazer. I've been able to remove the nut holding on the sending tube. At this point, is it really 3 screws holding the gauge in place, from the rear, as the service manual implies. I"m quoting 'Oil and/or Air Pressure Gauge Replacement' on page 12-14 on a reprinted manual: "Remove three (3) rear cover retaining screws. Tip cover and gauge assembly and remove from instrument cluster housing."