The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - what does a front dana 60 look like ? & the differences between an np205 and a 208?

**Yukon Jack** · 08-06-2008, 04:21 PM

A Dana 60 won't be stock in a 1973 truck, but of course one could be swapped in.

Here's a pic of a 1984 Dana 60 that is going into my 69 K20 - you will see that it has three sets of u-bolts and then two studs that secure the axle to the springs.

Here's an NP205

08-06-2008, 04:21 PM	#2
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,689	Re: what does a front dana 60 look like ? & the differences between an np205 and a 20 A Dana 60 won't be stock in a 1973 truck, but of course one could be swapped in. Here's a pic of a 1984 Dana 60 that is going into my 69 K20 - you will see that it has three sets of u-bolts and then two studs that secure the axle to the springs. Here's an NP205 __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 08-06-2008 at 04:21 PM.