The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - In need of help How to change Steering Column Floor-Seal

**KevsClassics** · 08-07-2008, 11:29 PM

Steering column will have to be almost completely disassembled. If you do not have the know how to take it apart there is a cheaters way. The lever for the linkage at the bottom of the column can be bent down enough to slide the seals over it. Then just simply bend it back up. This is not the correct way but it does work.

08-07-2008, 11:29 PM	#2
KevsClassics TILT COLUMN GURU Join Date: Dec 2006 Location: FRESNO CA Posts: 4,276	Re: In need of help How to change Steering Column Floor-Seal Steering column will have to be almost completely disassembled. If you do not have the know how to take it apart there is a cheaters way. The lever for the linkage at the bottom of the column can be bent down enough to slide the seals over it. Then just simply bend it back up. This is not the correct way but it does work.