The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - In need of help How to change Steering Column Floor-Seal

ChevLoRay · 08-08-2008, 06:15 AM

In my opinion, if you don't want to bend the arm....then everything that is a larger diameter than the hole in the gasket/seal, or protrudes from the column will have to be removed. Steering wheel, shifter arm, turn signal arm, the bell beneath the steering wheel that houses the tilting mechanism, etc.

08-08-2008, 06:15 AM	#7
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: In need of help How to change Steering Column Floor-Seal In my opinion, if you don't want to bend the arm....then everything that is a larger diameter than the hole in the gasket/seal, or protrudes from the column will have to be removed. Steering wheel, shifter arm, turn signal arm, the bell beneath the steering wheel that houses the tilting mechanism, etc. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.