|
frame straight?
you may want to try this method of checking your frame.on the opposite side or the good side select measuring points from the frame to the end of the control arms.measure both upper and lower control arms in the exact same locations.then measure the other side,compare measurements.this will tell you where the problem is,whether it's in your suspension or the frame itself.if you can try to collapse the coil spring on the bad side to relieve tension on the suspension.see if you can (wiggle) the wheel front to rear.this way you can see any extreme wear on the suspension components.other than obvious damage to your frame,you will have to take measurements to see if your frame has went "diamond".a good body man can help you out there.good luck!
|