The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

miket · 02-11-2003, 09:36 PM

Sam,

I am not sure where you are in this project but I rebuilt an internally regulated alternator with 105 amp parts and purchased a conversion kit for $20 or so to bypass the voltage regulator. It took less than an hour and I was done. I have provided the links for both sites below. It was virtually plug and play. I did use the 10SI alternator which is virtually the same case as the 10DN from pre-71 vehicles.

Alternator parts:
http://www.alternatorparts.com/gm_al...grade_kits.htm

Conversion kit:
http://www.wiringharness.com/custommods.htm

hope it helps.

02-11-2003, 09:36 PM	#3
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	Sam, I am not sure where you are in this project but I rebuilt an internally regulated alternator with 105 amp parts and purchased a conversion kit for $20 or so to bypass the voltage regulator. It took less than an hour and I was done. I have provided the links for both sites below. It was virtually plug and play. I did use the 10SI alternator which is virtually the same case as the 10DN from pre-71 vehicles. Alternator parts: http://www.alternatorparts.com/gm_al...grade_kits.htm Conversion kit: http://www.wiringharness.com/custommods.htm hope it helps.