The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jonzcustomshop · 08-20-2008, 02:29 PM

the new side profile.
the shots with the hood on.
I will have to use the rear bit of a 60-66 hood to get the straight edge across the back, and the gap is wedge shaped (the 60 cab is a half inch wider than the plymouth), so I will have to cut and fix that.
First I am going to try to find a beter hood to start with, this one had frozen hinges, and somebody shut it anyway, so it is a little bent.

08-20-2008, 02:29 PM	#109
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: my radical 60 build the new side profile. the shots with the hood on. I will have to use the rear bit of a 60-66 hood to get the straight edge across the back, and the gap is wedge shaped (the 60 cab is a half inch wider than the plymouth), so I will have to cut and fix that. First I am going to try to find a beter hood to start with, this one had frozen hinges, and somebody shut it anyway, so it is a little bent. Attached Images