The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

19GMC63 · 09-03-2008, 08:02 PM

you took off the bracket that holds the brake switch right? I can't remember if you HAVE to take that out, but I did. And i'm guessing the four bolts your referring to are for the the plate that holds the rubber piece that seals the firewall.

Like jonzcustomshop said, on the firewall below the mc (or behind the booster if you got one) there are three bolts that hold a bracket that the column is clamped too... plus the two rag joint nuts, and that should be it.

You might have to mess with the shifter to get it in the right location so you can pull it through the hole.

09-03-2008, 08:02 PM	#3
19GMC63 Registered User Join Date: Nov 2006 Location: Nashville, TN Posts: 1,510	Re: dash question 65 you took off the bracket that holds the brake switch right? I can't remember if you HAVE to take that out, but I did. And i'm guessing the four bolts your referring to are for the the plate that holds the rubber piece that seals the firewall. Like jonzcustomshop said, on the firewall below the mc (or behind the booster if you got one) there are three bolts that hold a bracket that the column is clamped too... plus the two rag joint nuts, and that should be it. You might have to mess with the shifter to get it in the right location so you can pull it through the hole.