The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Rally caps, a/c controller,other parts/misc.

Botietruck · 09-10-2008, 07:53 PM

Blue71, The 2 controllers have both top levers broken and one controller is missing the cable attaching screws. The condenser core has the correct size fittings but the bottom fitting comes straight out and does not turn up at a 90 degree angle. I was going for "as close to original as I could get" and I elected to order a new one from a vendor @ $180.00. I could not return this, as I purchased it several years ago when I started the project. I hope this helps answer your questions.
HuggerCSt bought the exp. valve, sorry.
Bob

09-10-2008, 07:53 PM	#13
Botietruck '71 chevy s.bed/s.side Join Date: Mar 2005 Location: Chesapeake, VA Posts: 1,571	Re: Rally caps, a/c controller,other parts/misc. Blue71, The 2 controllers have both top levers broken and one controller is missing the cable attaching screws. The condenser core has the correct size fittings but the bottom fitting comes straight out and does not turn up at a 90 degree angle. I was going for "as close to original as I could get" and I elected to order a new one from a vendor @ $180.00. I could not return this, as I purchased it several years ago when I started the project. I hope this helps answer your questions. HuggerCSt bought the exp. valve, sorry. Bob __________________ STILL PLAYS WITH CARS...AND TRUCKS!! Parents! Be good to your kids...they get to choose your nursing home! 250 I-6 with a 3 speed Saginaw and Borg Warner Overdrive...She's got overdrive! Last edited by Botietruck; 09-10-2008 at 07:54 PM.