The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**crossy** · 05-10-2001, 11:03 AM

if that is the film type ,which is waht it sounds like than you can peel it off. that usually leaves the glue residue on the glass. the best way that I have found is to peel and work under the edge of it at the same time with a glass scraper [widget] the type that uses a single edge razor.whatever is left can be "dissolved " off with a thinner.then clean the film with with windex.

05-10-2001, 11:03 AM	#6
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,042	if that is the film type ,which is waht it sounds like than you can peel it off. that usually leaves the glue residue on the glass. the best way that I have found is to peel and work under the edge of it at the same time with a glass scraper [widget] the type that uses a single edge razor.whatever is left can be "dissolved " off with a thinner.then clean the film with with windex. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww 84,C10 SWB-Yella,stock 86 K10 SWB-Red, hopped up 305,4/S LOTS of Cummins trucks.