WHEN I REBUILT THE FRONTEND ON MY 72 PROJECT, I TOOK 3 1/4" GRADE 8 BOLTS & WELDED THEM IN PLACE OF THE STOCK BOLTS. I ALSO MILLED MY OLD UPPER CONTROL ARM SHAFTS TO 5/8" , CUT OFF THE THREADED ENDS, & USED THEM AS SPACERS, SO I DIDN'T NEED 47 SHIMS.
( AN AIRHAMMER POPPED THE OLD BOLTS RIGHT OUT. THEY'RE PRESSED IN)
__________________
junkyardjohn
69 1 TON TOW TRUCK //
84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE.
THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES//
LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS)
DON'T RENT U-HAUL
ALWAYS TELL THE TRUTH
IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST