Quote:
Originally Posted by Old Chevy Mech
One suggestion that I believe will save repairs in the furure is to POR-15 the entire inside of the door while its off the truck. Itsa pain, but if the stuff is a s good as it costs, it's worth it. I did the complete 3 step process in hopes it will make the doors last another 38 years.  I did the inside if the front fenders with POR-15 as well. Its amazing how the inner upper part is a moisture trap and was the rustiest spot on the inside of the fender.
Frank. |
I totally agree with this, and did the same thing. Coat the entire bottom inside of the door with POR 15....a small hole drilled in the rear will also let water run out if any gets in there due to old rotten window sweeps. A small can of POR 15 is about 8 bucks, and is MORE than enough to do the doors