The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

progress · 02-18-2003, 04:26 PM

If you can find a way to bolt of weld them to the frame they will fit...LOL! Not sure about the Tahoe but so many of the later models do fit. Just measure distance between the frame rails. Those mounts usually are adjustable anyway. In my truck they are welded on. I am switching them to another truck so I will just bolt them in. The end that attaches to the lower A-arm just bolts through an eye in the stabilizer. Just use a tape measure on that end to see where it would have to mount on the "67-'72 A-arm. If it is close...no problem.

02-18-2003, 04:26 PM	#4
progress Gotta luv a clean shave Join Date: Jan 2002 Location: Kent, WA Posts: 226	If you can find a way to bolt of weld them to the frame they will fit...LOL! Not sure about the Tahoe but so many of the later models do fit. Just measure distance between the frame rails. Those mounts usually are adjustable anyway. In my truck they are welded on. I am switching them to another truck so I will just bolt them in. The end that attaches to the lower A-arm just bolts through an eye in the stabilizer. Just use a tape measure on that end to see where it would have to mount on the "67-'72 A-arm. If it is close...no problem. __________________ Welding while you wait...you can help if you like and it...might even save you a little as long as you don't mess things up! We make house calls too...just like the old days!