The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

f.monroe · 10-19-2008, 01:13 AM

If I remember correctly . Use a ratchet , extension, and 9/16 socket and there is a hole in the cab on the inside . You will need the short extension to reach the outside of the cab . Crawl under the dash and you will find a hole in the same location as the bolt tip on the outside . I dont think it was that hard to get to .
Frank

10-19-2008, 01:13 AM	#3
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: door gap adjustment If I remember correctly . Use a ratchet , extension, and 9/16 socket and there is a hole in the cab on the inside . You will need the short extension to reach the outside of the cab . Crawl under the dash and you will find a hole in the same location as the bolt tip on the outside . I dont think it was that hard to get to . Frank __________________ Born and proudly residing in a Red State !