The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

msgross · 10-19-2008, 07:27 PM

COuld someone double check my measurement with their cab? I need to know how far below the floor is from this line (or any given point on the rear of the cab. I just replaced my entire floor and used the L-brackets that my 68 has for the rear measurement. Just want to be sure that the rear of my floor doesn't need to come up.

The B-pillar patches that I have are about 1" high if I use the body lines, I have a feeling that they are just off...

thanks

this is the rear cab wall to the layered metal that holds the top of the gas tank... a window measurement would work as well...

10-19-2008, 07:27 PM	#1
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Cab measurement needed please COuld someone double check my measurement with their cab? I need to know how far below the floor is from this line (or any given point on the rear of the cab. I just replaced my entire floor and used the L-brackets that my 68 has for the rear measurement. Just want to be sure that the rear of my floor doesn't need to come up. The B-pillar patches that I have are about 1" high if I use the body lines, I have a feeling that they are just off... thanks this is the rear cab wall to the layered metal that holds the top of the gas tank... a window measurement would work as well... Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"