The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 67-72 2wd lift

Arad68 · 10-23-2008, 06:48 PM

I used 3/4 ton 2wd front springs on my 68 but did not like the ride. Very stiff. I went to Rancho springs and shocks. They said 1.5" on the kit but I got a whopping 3" total and the ride is a lot less stiff.

Here are the part numbers and links.

Springs - http://www.partsamerica.com/ProductD...ype=59&PTSet=A

Front Shocks - http://www.partsamerica.com/ProductD...ype=49&PTSet=A

Rear shocks - http://www.partsamerica.com/productd...ype=50&PTSet=A

The rear springs are stock 3/4 ton varible rate

http://www.partsamerica.com/ProductD...ype=60&PTSet=A

10-23-2008, 06:48 PM	#6
Arad68 Trucks N Tranzams Join Date: Dec 2002 Location: North Las Vegas, Nevada Posts: 816	Re: 67-72 2wd lift I used 3/4 ton 2wd front springs on my 68 but did not like the ride. Very stiff. I went to Rancho springs and shocks. They said 1.5" on the kit but I got a whopping 3" total and the ride is a lot less stiff. Here are the part numbers and links. Springs - http://www.partsamerica.com/ProductD...ype=59&PTSet=A Front Shocks - http://www.partsamerica.com/ProductD...ype=49&PTSet=A Rear shocks - http://www.partsamerica.com/productd...ype=50&PTSet=A The rear springs are stock 3/4 ton varible rate http://www.partsamerica.com/ProductD...ype=60&PTSet=A __________________ Don '68 Chevy LB 383 TH400/GV/373 posi '56 Chevy 4WD SWB '64 Chevy short stepside '79 Trans Am 455/TH2004R/12blt/4whldisc 95 Kia (Wifes car) 2002 S-10 extended cab pickup "God punishes small sins immediately"