Swifty, the mounts are easily made using tubing or bent flat stock. If you need pics of the mounts themselves or have questions, just let me know. The question you need to ask is, "how much modification do you want to do?" The higher you go, the less changes you need to make. If you go six inches or more, everything rides on "top" of the frame and you don't have to cut much. I was there once and it worked ok. In my opinion, for the amount of work this swap takes, I have decided to go lower. Currently my front mounts are 3 1/2 inches plus the s10 cab bushing. The rear mounts are 4 plus the bushings. If you haven't checked out my thread, you can see it at
http://67-72chevytrucks.com/vboard/s...d.php?t=294539. If you have any questions, I will try to help out as much as I can.
Thanks,
Jeff