The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

oldspowered67C10 · 11-01-2008, 05:58 AM

Truthfully, the stock suspension parts can be made to work pretty well. As said before, mounting the engine/trans as low and far back in the frame as possible would help alot also. But you really need to do something about the frame though. The stock frame simply doesnt have nearly enough torsional rigidity to do anything seroius with. All the best suspension stuff in the world wont help much if the frame wont let it do its job properly.

11-01-2008, 05:58 AM	#15
oldspowered67C10 Registered User Join Date: Jan 2006 Location: Cherry Valley,Ca Posts: 468	Re: Turning left, and right... Truthfully, the stock suspension parts can be made to work pretty well. As said before, mounting the engine/trans as low and far back in the frame as possible would help alot also. But you really need to do something about the frame though. The stock frame simply doesnt have nearly enough torsional rigidity to do anything seroius with. All the best suspension stuff in the world wont help much if the frame wont let it do its job properly.