|
Re: Im at my wits end here with door alignment.
Quote:
Originally Posted by lyrikz
My plan is to remove the spot welds at the rear of the window track and move it UP 1/4 of an inch. Reweld it in and if i dont like how it looks i will do what you said and take some out of the top of the a pillar area....
|
Just looking at it I think that the door will hit the cab in that front corner.... Looks tight now and if you raise the back that will move forward... unless you cut it where I cut mine to allow that gap to open up so just the top move up then reweld it.. Never the less... Good luck!
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08
67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast.
64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten..
54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread...
07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind..
http://67-72chevytrucks.com/vboard/s...d.php?t=339340
See pics of my trucks in my profile
|