The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Aluminum driveshafts, are any of you guys running one?

71stub · 11-25-2008, 11:53 AM

I talked to my friend about his aluminum driveshaft he is running. He got it out of a 92-98or so crown victoria. (I call em the bubble top fords) They use a 354 u-joint and our trucks use a 369 so he installed a 353 u-joint which has bastard ends on it and it works perfect. He is running a 700R4 in a shortbox. Hope this helps.

11-25-2008, 11:53 AM	#11
71stub Registered User Join Date: Mar 2008 Location: Forman, ND Posts: 365	Re: Aluminum driveshafts, are any of you guys running one? I talked to my friend about his aluminum driveshaft he is running. He got it out of a 92-98or so crown victoria. (I call em the bubble top fords) They use a 354 u-joint and our trucks use a 369 so he installed a 353 u-joint which has bastard ends on it and it works perfect. He is running a 700R4 in a shortbox. Hope this helps. __________________ 1971 Cheyenne Short Fleet - 468BB/TH400, Tilt, Tach, PS, PB 1967 Custom Short Fleet - 327/4spd