no problems with the front end. the only posible problem would be if you needed several shims for the upper controlarms to correct the negative camber, the upper control arm bolts might be too short to allow the use of enough shims. if thats the case all you need to get is longer bolts that will allow more shims to fit 
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works
'05 1500 Crew Cab
RIP
'84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker
'80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's
|