The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - is anyone laying frame on an oem torsion?

Dustin07 · 11-27-2008, 05:35 PM

If I only notch the back to basically drop the fender on the tire (about another 4-5 inches) would it be worth a Z in the front, or should I just do a xmember conversion? I forgot about that fender issue I posted about earlier. I'm thinking that would put the rear at pretty close to where yours is. maybe 1-2 inches higher. But an overall drop of like 17+ inches lol.

11-27-2008, 05:35 PM	#5
Dustin07 Stirrer of the Pot Join Date: Mar 2008 Location: washington Posts: 477	Re: is anyone laying frame on an oem torsion? If I only notch the back to basically drop the fender on the tire (about another 4-5 inches) would it be worth a Z in the front, or should I just do a xmember conversion? I forgot about that fender issue I posted about earlier. I'm thinking that would put the rear at pretty close to where yours is. maybe 1-2 inches higher. But an overall drop of like 17+ inches lol. Last edited by Dustin07; 11-27-2008 at 05:36 PM.