The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

skchevota · 12-01-2008, 10:06 PM

If you changed your core support mounts and not the cab mounts, that would be why it is high. the cab mounts are most likley degraded. If not, and the support is still high after you tighten the core support then you will need to shim up the cab.

12-01-2008, 10:06 PM	#7
skchevota Registered User Join Date: Oct 2006 Location: Evans, Colorado Posts: 530	Re: tricks for getting the front clip on If you changed your core support mounts and not the cab mounts, that would be why it is high. the cab mounts are most likley degraded. If not, and the support is still high after you tighten the core support then you will need to shim up the cab.