The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**WIDESIDE72** · 12-11-2008, 01:36 PM

I don't have any, but just got done putting a hybrid TBI intake onto a Vortec motor. FYI, there is nothing special about the bolts, unless you are going for the "stock" look. They are 5/16" diameter. I forget the length, but it seems they are about 1 1/2" long. I pulled the stock bolts out and used longer bolts to attach the engine to the lift when i put the engine in. A hardware store should have them, or GM parts. I could imagine that GM will be high $$$ though.

12-11-2008, 01:36 PM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: WTB GM vortec intake bolts I don't have any, but just got done putting a hybrid TBI intake onto a Vortec motor. FYI, there is nothing special about the bolts, unless you are going for the "stock" look. They are 5/16" diameter. I forget the length, but it seems they are about 1 1/2" long. I pulled the stock bolts out and used longer bolts to attach the engine to the lift when i put the engine in. A hardware store should have them, or GM parts. I could imagine that GM will be high $$$ though.