The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Need FULL disclosure on TH350 to 700R4 swap

Jonboy · 12-12-2008, 05:52 PM

I put one in my 77 2wd. You will need to drill the new holes in the crossmember, get a bracket for the TV cable (and a cable if you don't get one with the transmission), a lockup for the TCC, and the driveshaft will have to be shortened. When I swapped mine out, I was able to pirate everything out of an 82 2wd, so I am not sure how much the driveshaft will have to be shortened. The cooler lines should work just fine.

12-12-2008, 05:52 PM	#6
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Need FULL disclosure on TH350 to 700R4 swap I put one in my 77 2wd. You will need to drill the new holes in the crossmember, get a bracket for the TV cable (and a cable if you don't get one with the transmission), a lockup for the TCC, and the driveshaft will have to be shortened. When I swapped mine out, I was able to pirate everything out of an 82 2wd, so I am not sure how much the driveshaft will have to be shortened. The cooler lines should work just fine.