The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Psycho71 · 12-13-2008, 02:00 PM

Hmm, didn't we go thru a thread with you a while back on installing an EZ harness? Or was that a different truck?

But yeah, to answer your question, you can get a complete original type harness for your truck through LMC or several of the board vendors I'm sure. If you're just wanting original, you will spend a bit of $$ on all of the different sections of it. But it is done all the time. One of the aftermarket harness' would be much cheaper tho. Just food for thought.

Jay

12-13-2008, 02:00 PM	#5
Psycho71 Registered User Join Date: Jan 2006 Location: Kaufman, Tx Posts: 827	Re: original harness? Hmm, didn't we go thru a thread with you a while back on installing an EZ harness? Or was that a different truck? But yeah, to answer your question, you can get a complete original type harness for your truck through LMC or several of the board vendors I'm sure. If you're just wanting original, you will spend a bit of $$ on all of the different sections of it. But it is done all the time. One of the aftermarket harness' would be much cheaper tho. Just food for thought. Jay __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. If a hammer doesn't fix it, you have an electrical problem! Slot Cars, 1:24 Scale, 100MPH@100,000RPM, fastest things on wheels!