You can see here it is already trimmed to sit at the correct angles.
At this point you can go ahead and tack in your upper bag mounts. Before you weld it in though, give it a quick eyeball to make sure it lines up with the lower bag bracket on the lower a-arm. We found that on our frame a previous plug protruded just a hair on the drivers side, so we went ahead and trimmed the bracket just a hair to line it back up.
Don’t try and level the upper bag bracket. Just make it parallel the bottom bracket.
Here Severy is marking the frame for the rack cutouts. Not all frames require this, but the height on the 67-72 frame is so tall it needs one. He just used the cutout as a template
