The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**leddzepp** · 12-18-2008, 06:40 PM

I am going to lower the rear of my truck with 4" coil springs. I have 2" lowering blocks now, which I am going to remove, so I will have 4" lowered total with the springs. Will I need to correct my pinion angle with degree wedges? I used to lift Jeep CJ's a long time ago, and had to use wedges to correct the pinion angle. Thanks for your help.

12-18-2008, 06:40 PM	#1
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,117	Pinion angle when lowering the rear I am going to lower the rear of my truck with 4" coil springs. I have 2" lowering blocks now, which I am going to remove, so I will have 4" lowered total with the springs. Will I need to correct my pinion angle with degree wedges? I used to lift Jeep CJ's a long time ago, and had to use wedges to correct the pinion angle. Thanks for your help.