The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

leatherhead63 · 12-24-2008, 06:13 PM

Greetings

Replaced my seal on the rear output yoke of the NP205 TC. No oil on the drive way for a few days. Checked every day and it was dry. Then today it's bleeding around the seal and dropping oil. So I looked to see if maybe the vent hose is plugged. The question is I don't see a hose so where is the vent located ?

Thanks

1972 K10

12-24-2008, 06:13 PM	#1
leatherhead63 Registered User Join Date: Jun 2008 Location: Yuma, Arizona Posts: 43	NP205 Vent Hole Greetings Replaced my seal on the rear output yoke of the NP205 TC. No oil on the drive way for a few days. Checked every day and it was dry. Then today it's bleeding around the seal and dropping oil. So I looked to see if maybe the vent hose is plugged. The question is I don't see a hose so where is the vent located ? Thanks 1972 K10