The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Tamper · 12-24-2008, 07:18 PM

Thanks guys for the reply. I figured that an older chevy like this with only 2 rust holes the size of silver dollars was decent. Heck the frame still is black. It needs a carb, and as you all could see a drivers side fender. Just finding one in Ohio that has little rust, is going to be a challenge. And thanks I didnt know if chevy put blocks on the rear or not from the factory. I just need to find another set of springs (I got a couple broken ones), and a set of front springs to get the arch out of it. But hopefully I will have good luck with it. Thanks again,
Tamper

12-24-2008, 07:18 PM	#8
Tamper Registered User Join Date: Nov 2008 Location: Beallsville Ohio Posts: 10	Re: Hello all and some pics Thanks guys for the reply. I figured that an older chevy like this with only 2 rust holes the size of silver dollars was decent. Heck the frame still is black. It needs a carb, and as you all could see a drivers side fender. Just finding one in Ohio that has little rust, is going to be a challenge. And thanks I didnt know if chevy put blocks on the rear or not from the factory. I just need to find another set of springs (I got a couple broken ones), and a set of front springs to get the arch out of it. But hopefully I will have good luck with it. Thanks again, Tamper