Quote:
Originally Posted by 71tahoe
The last 2 parts I got from the O were a fan clutch (good) and motor mount (metric threads=bad). I used AA for the wheel cylinders for my '71 and they were a little tight. I had to start the bolts and then tighten to seat. Filing would have helped but wasn't necessary.
|
I went to a local chevy dealer and of course the part #'s rolled 3 to four times. the guy started out looking in a book, looked on his computer, went to another computer, & made a phone call(at least customer service isn't dead) to find out that they are not available and recomended LMC.
I did exactlly what 71TAHOE DID and with my less expensive, identical part #'s as the O' from NAPA and every thing worked out great. It was tight but they fit.
Part # 13387 Driver side
13388 Pass. side
You all "WERE RIGHT" & YOU ALL ROCK!!!!!