|
Re: Building a Blazer - vtblazer's Way
Quote:
Originally Posted by vtblazer
Well...I asked the guy why I was told it would ship on Friday when in fact it didn't and his answer was that one of the arms was missing the set screw on top and he only found that out later.
Even so, they could have done/offered a couple things IMO.
1) Send me an e-mail telling me about their snafu. (at the very least)
2) Upgraded my shipping to 2nd day air to make up for the lost time.
I got neither.
D60 tech note:
FYI to those about to change out the inner axle seals, know this.
Their a huge PITA... 
Both pulling and installing without 'proper' tools. |
Are they different from a dana 44? When everything is out they are easy to remove with a long piece of pipe. As for installing i made a tool like this one to make them easier.
__________________
Mike T.
Oregon
70 GMC Jimmy 4x4
70 Camaro LS1 plans in the works
71 RS/SS Camaro numbers matching
86 Chevy Silverado SWB 4x4 (454 merlin heads, 3/4 running gear upgrade, Detroit lockers front and rear)
Last edited by EFI70Blazer; 12-31-2008 at 03:31 PM.
|