The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Yukon Jack** · 01-03-2009, 07:21 PM

Yep. Only thing you might need to address is the brake lines - the ends are sometimes different. You can use adapters to mate the newer axle's rubber lines to your hard line or make a new set of hard lines like I did.

I see you have a 67 - that has the closed knuckle axle so you'll want the newer axle's steering arm since your steering arm is different.

01-03-2009, 07:21 PM	#4
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,689	Re: front axle swap Yep. Only thing you might need to address is the brake lines - the ends are sometimes different. You can use adapters to mate the newer axle's rubber lines to your hard line or make a new set of hard lines like I did. I see you have a 67 - that has the closed knuckle axle so you'll want the newer axle's steering arm since your steering arm is different. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14