The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ChevLoRay · 01-06-2009, 06:32 PM

I reckon I'd just run a new 1/4-inch line, with the bends as needed to accomodate the frame rail, up to the point where it would need a piece of flexible fuel line on each end to connect, "as needed". The original gas tank has the steel line connected to the pickup/float ass'y. I'd do the same to eliminate the possibility of a rubber fuel line decaying and being difficult to get to. That's my 2-cents worth. It's your truck.

01-06-2009, 06:32 PM	#5
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Got Any Opinions On A Couple Of Things ? I reckon I'd just run a new 1/4-inch line, with the bends as needed to accomodate the frame rail, up to the point where it would need a piece of flexible fuel line on each end to connect, "as needed". The original gas tank has the steel line connected to the pickup/float ass'y. I'd do the same to eliminate the possibility of a rubber fuel line decaying and being difficult to get to. That's my 2-cents worth. It's your truck. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.