Quote:
Originally Posted by lolife99
Hawker7,... If you plan on running a 2.5" drop spindle,... a 4.5 backspace on a 15" rim will be a problem. (the inside edge of the wheel will contact the spindle in the lower ball joint area) People with 4" backsapce even have this proble. On a bigger diameter rim it would be ok. (17" thru 20" wheels)
I just think a 275/60 will stick outside the fenders on a lowered truck, and cause rubbing issues. On a stock height truck they will be fine. Remember. The front "track width" on these trucks is wider than the rear track width.
My personal preference is a 7" or 8" wheel up front and a 9.5" or 10" wheel in the rear. It compensates for the different track width. (just my opinion)
|
Have you run this setup and had issues? I'm just going by LEEVON who is running 275/60's on 15x8 with 4.5 backspacing and says he has no issues. I just don't want to buy any wheels and find out they don't fit, so that is why I'm looking for anyone who has run this setup.