The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Prong · 01-17-2009, 07:13 PM

I recently bought a set of new Moog ball joints for one of my 79's, and they now come with a fitting in the side of the joint at the bottom edge so they can be greased just like the lower ones during a normal service. I know that doesn't help you right now, but when it come time to replace them, it's a handy option. What's funny is on my old 76 with the Dana 44, there was enough clearance to leave a zerc in there so you didn't have to tear things down to grease them.

01-17-2009, 07:13 PM	#5
Prong Registered User Join Date: May 2007 Location: CO Posts: 476	Re: 4X4, greasable ball joints. I recently bought a set of new Moog ball joints for one of my 79's, and they now come with a fitting in the side of the joint at the bottom edge so they can be greased just like the lower ones during a normal service. I know that doesn't help you right now, but when it come time to replace them, it's a handy option. What's funny is on my old 76 with the Dana 44, there was enough clearance to leave a zerc in there so you didn't have to tear things down to grease them. Last edited by Prong; 01-17-2009 at 09:02 PM.