The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

vin63 · 01-20-2009, 02:16 PM

I doubt it will work if the rearend housings are different lengths. It's relatively inexpensive these days to have new axles cut and have the flange drilled for the 5-lug pattern you want. Check around with your local axle and rearend shops. Good luck.

01-20-2009, 02:16 PM	#2
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: Will it work or not? I doubt it will work if the rearend housings are different lengths. It's relatively inexpensive these days to have new axles cut and have the flange drilled for the 5-lug pattern you want. Check around with your local axle and rearend shops. Good luck. __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes Last edited by vin63; 01-20-2009 at 02:16 PM.