The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Adjustable Panhard Bar Which one 2 use ECE/CPP?

Kayotic · 01-24-2009, 03:15 PM

Not sure I follow,

It get's installed in the original location on the frame. Then the other end gets sandwiched between the axle pad and trailing arm on the pasenger side.

It doesn't mount to the tube at all.

There are plenty of pics here, even recently can't remember where I saw it. I'll be back with a link...

Did not find a link yet, but I was wrong about the bracket on the pass. side trailing arm. It goes on the bottom of the arm.

01-24-2009, 03:15 PM	#5
Kayotic Registered User Join Date: Mar 2008 Location: Lawrenceville, Ga Posts: 300	Re: Adjustable Panhard Bar Which one 2 use ECE/CPP? Not sure I follow, It get's installed in the original location on the frame. Then the other end gets sandwiched between the axle pad and trailing arm on the pasenger side. It doesn't mount to the tube at all. There are plenty of pics here, even recently can't remember where I saw it. I'll be back with a link... Did not find a link yet, but I was wrong about the bracket on the pass. side trailing arm. It goes on the bottom of the arm. __________________ Atlanta Craigslist Hurst Indy Pickup Truck 3-Speed Shifter - 5010016 Last edited by Kayotic; 01-24-2009 at 03:23 PM.