The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

john02fxdl · 01-25-2009, 02:57 PM

I installed Brothers one piece window kit in my 70 last month. It went in pretty easy with not much headaches. I don't have any pics but can get you some soon.The front window channel gets bolted in on the bottom hole to the door via a sheet metal screw. The aluminum triangle gets bolted in with one screw where the vent window rivets used to be. The front channel lays in the triangle and then your channel felt goes into it. I ran the door channel weatherstrip behind the triangle to help it seal. I hope this helps. Sorry no pics right now, I'm not down at my shop.

01-25-2009, 02:57 PM	#3
john02fxdl Registered User Join Date: Oct 2008 Location: Avondale, PA. South east corner of the state Posts: 75	Re: one piece window kit I installed Brothers one piece window kit in my 70 last month. It went in pretty easy with not much headaches. I don't have any pics but can get you some soon.The front window channel gets bolted in on the bottom hole to the door via a sheet metal screw. The aluminum triangle gets bolted in with one screw where the vent window rivets used to be. The front channel lays in the triangle and then your channel felt goes into it. I ran the door channel weatherstrip behind the triangle to help it seal. I hope this helps. Sorry no pics right now, I'm not down at my shop.